Quelltext der Seite VP5500/bootlog

Dies ist ein Mitschnitt der Ausgaben auf der seriellen Schnittstelle des Geräts

<pre>
Consider yourself BLOBed!

blob version 2.0.5-pre2 for Freescale M9328MX21ADS i.MX21 DragonBall TO2.1 Appli                                                                                                                               cation Development System
Copyright (C) 1999 2000 2001 Jan-Derk Bakker and Erik Mouw - Patched by Philips.
blob comes with ABSOLUTELY NO WARRANTY; read the GNU GPL for details.
This is free software, and you are welcome to redistribute it
under certain conditions; read the GNU GPL for details.
PCE Module version: BLOB-1.14
Memory map:
  0x04000000 @ 0xc0000000 (64 MB)
r14_svc = 0x000003cb
PCB version detected: indice5
Boot from Power-On-Reset -
Block 500ms more for checking PowerKey before continue.
Resume boot process...
Autoboot in progress, press any key to stop .Loading kernel from flash .... done

Starting kernel ...

Uncompressing Linux.................................................... done, bo                                                                                                                               oting the kernel.
Linux version 2.4.20-celf3 (root@cis0697) (gcc version 3.3.2) #1 Fri Apr 7 14:43                                                                                                                               :42 UTC 2006
CPU: ARM926EJ-Sid(wb) [41069264] revision 4 (ARMv?(8))
CPU: D undefined 14 cache
CPU: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Machine: Freescale i.MX2 ADS
FCLK=266000 kHz   HCLK=133000 kHz  IPGCLK=66500 kHz
PERCLKs: 1=44333 KHz  2=33250 kHz  3=44333 kHz  4=88666 kHz
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd ip=none
Console: colour dummy device 80x30
Calibrating delay loop (skipped)... 132.71 BogoMIPS
Memory: 64MB = 64MB total
Memory: 63060KB available (1357K code, 299K data, 68K init)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: Simulating APM BIOS version 1.2 (Driver version 1.0)
i.MX21 Dynamic Power Management
Starting kswapd
Disabling the Out Of Memory Killer
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications                                                                                                                                AB.
i2c-core.o: i2c core module version 2.6.2 (20011118)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with no serial options enabled
UART driver version 0.3.6
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
I2C driver Apr  7 2006 / 14:44:18
Initialize i2c-client-dbmx-codec module
Philips Flash for MX21: probing 32-bit flash bus
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Using static partition definition
Creating 5 MTD partitions on "Philips Flash for MX21":
0x00000000-0x00014000 : "bootloader"
0x00014000-0x00100000 : "kernel"
0x00100000-0x01ce0000 : "fs #1"
0x01ce0000-0x01fe0000 : "fs #2"
0x01fe0000-0x02000000 : "fs #3"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com
VFS: Mounted root (jffs2 filesystem).
Freeing init memory: 68K
serial c*** Running rc.splash
nm -w 10015140 (0x9ffffc1f AND 0x9FFFFFFF)
mm -w 10015140 9ffffc1f
PCB version: ind5
FF board configuration selected: ind5
Driver SYSTCLK: SYSTCLK-1.12 (REFERENCED)
Driver GPIO-1.59 (REFERENCED)
GPIO: p_gpio_it_init at 572
Driver FRAMEBUF-1.12 (REFERENCED)
Driver SPI-1.20 (REFERENCED) Debug level 3

u32_spi1_MinLenghtForDMAInTX set to 300

u32_spi1_MinLenghtForDMAInRX set to 300
Driver LCD-1.20 (REFERENCED)
nm -w 10015140 (0x9f3ffc1f OR 0x00000040)
mm -w 10015140 9f3ffc5f
Driver TVLINK-1.45 (REFERENCED)
Reset from Power-On Reset.
chmod: /etc/rc.d/init.d/S91dpm: No such file or directory
chmod: /etc/rc.d/init.d/S80apptrk: No such file or directory
mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1024 inodes, 4096 blocks
204 blocks (4.98%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1024 inodes per group

Writing inode tables: done
Writing superblocks and filesystem accounting information: done
mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
1024 inodes, 4096 blocks
204 blocks (4.98%) reserved for the super user
First data block=1
1 block group
8192 blocks per group, 8192 fragments per group
1024 inodes per group

Writing inode tables: done
Writing superblocks and filesystem accounting information: done
Sat Jan  1 00:00:00 CET 2005
*** Running rc.modules
modprobe: Can't locate module mx2_mmc
*** Running rc.serial
*** Attempting to start S05syslog
Starting /sbin/syslogd
Done
077
Starting /sbin/klogd
Done
*** Attempting to start S06pcmcia
264/132 Mhz Blob detected !!!
Starting PCMCIA services: Linux PCMCIA Card Services 3.2.4
  kernel build: 2.4.20-celf3 #1 Thu Feb 22 18:23:13 UTC 2007
  options:  [apm]
i.MX21 TO2 PCMCIA (CS release 3.2.4)
dbmx_pcmcia_set_mem_map(): map (4) out of range
cardmgr[128]: watching 1 sockets
done.
*** Attempting to start S20network
Setting up link for loopback
Done
*** Attempting to start S23portmap
Starting /sbin/portmap
Done
*** Attempting to start S80emma
Loading eMMA post-processor module: Motorola PostProcessor Linux driver ver 0.64                                                                                                                                - Copyright (C) 2003 Motorola Inc
pp: hw ver = 2
GPIO: p_gpio_init_gpio_status at 1072
GPIO: CHARGE_OUT at init
GPIO: No accessory plugged at init.
GPIO: camera to front at init
Loading dmab module: Loading eMMA pre-processor module: prp_dbg=0
Motorola PreProcessor Linux driver ver 0.0 - Copyright (C) 2003 Motorola Inc
*** Attempting to start S81hantro
Loading Hantro decoder module: hmp4d: base_port=0x10026800 irq=50
hmp4d: module inserted
Loading Hantro encoder module: hmp4e: base_port=0x10026c00 irq=49
hmp4e: Compatble HW found with ID: 0x004c1882
hmp4e: module inserted. Major = 248
*** Running rc.local
Motorola CSI Linux driver ver 0.1
 - Copyright (C) 2004 Motorola Inc

Driver SENSOR-1.29 (REFERENCED)
Before calling register_pccard_driver
After calling register_pccard_driver
Entering cf_attach()
Before registering the client
BasePort1=0xc499a000, AssignedIRQ=28
After calling wlan_add_card function
Leaving cf_attach()
i2c-client version : 1.9
Initialize i2c-client-aic14 module
Module i2c-client-aic14 initialized
Insert module aic14 (AIC14-1.0)
Module AIC14 assumes CODEC MCLK already configured for 20480000Hz
Driver KPP-1.36 (REFERENCED)
Driver DOZE-1.27 (REFERENCED)
doze inserted with major number 154
+++++++++++++++++++++++++++++++++
MACAddress="00:16:41:72:70:8d"
JH="JH110648010053"
Test_status="C"
Barcode="190831003412"
+++++++++++++++++++++++++++++++++

imx21 login:
Module doze unregistered (major number = 154)
Driver KPP-1.36 (REFERENCED)
Driver DOZE-1.27 (REFERENCED)
conditions=0x7 gpio=255 gap=16
CMD_RESP: Host Sleep Cfg cmd resp 0x8043 received

imx21 login:
</pre>