VP5500/bootlog
Aus LaborWiki
Dies ist ein Mitschnitt der Ausgaben auf der seriellen Schnittstelle des VP5500.
Consider yourself BLOBed! blob version 2.0.5-pre2 for Freescale M9328MX21ADS i.MX21 DragonBall TO2.1 Appli cation Development System Copyright (C) 1999 2000 2001 Jan-Derk Bakker and Erik Mouw - Patched by Philips. blob comes with ABSOLUTELY NO WARRANTY; read the GNU GPL for details. This is free software, and you are welcome to redistribute it under certain conditions; read the GNU GPL for details. PCE Module version: BLOB-1.14 Memory map: 0x04000000 @ 0xc0000000 (64 MB) r14_svc = 0x000003cb PCB version detected: indice5 Boot from Power-On-Reset - Block 500ms more for checking PowerKey before continue. Resume boot process... Autoboot in progress, press any key to stop .Loading kernel from flash .... done Starting kernel ... Uncompressing Linux.................................................... done, bo oting the kernel. Linux version 2.4.20-celf3 (root@cis0697) (gcc version 3.3.2) #1 Fri Apr 7 14:43 :42 UTC 2006 CPU: ARM926EJ-Sid(wb) [41069264] revision 4 (ARMv?(8)) CPU: D undefined 14 cache CPU: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Machine: Freescale i.MX2 ADS FCLK=266000 kHz HCLK=133000 kHz IPGCLK=66500 kHz PERCLKs: 1=44333 KHz 2=33250 kHz 3=44333 kHz 4=88666 kHz On node 0 totalpages: 16384 zone(0): 16384 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: root=/dev/mtdblock2 noinitrd ip=none Console: colour dummy device 80x30 Calibrating delay loop (skipped)... 132.71 BogoMIPS Memory: 64MB = 64MB total Memory: 63060KB available (1357K code, 299K data, 68K init) Dentry cache hash table entries: 8192 (order: 4, 65536 bytes) Inode cache hash table entries: 4096 (order: 3, 32768 bytes) Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes) Page-cache hash table entries: 16384 (order: 4, 65536 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket apm: Simulating APM BIOS version 1.2 (Driver version 1.0) i.MX21 Dynamic Power Management Starting kswapd Disabling the Out Of Memory Killer JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications AB. i2c-core.o: i2c core module version 2.6.2 (20011118) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with no serial options enabled UART driver version 0.3.6 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize I2C driver Apr 7 2006 / 14:44:18 Initialize i2c-client-dbmx-codec module Philips Flash for MX21: probing 32-bit flash bus Amd/Fujitsu Extended Query Table v1.3 at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling fast programming due to code brokenness. Using static partition definition Creating 5 MTD partitions on "Philips Flash for MX21": 0x00000000-0x00014000 : "bootloader" 0x00014000-0x00100000 : "kernel" 0x00100000-0x01ce0000 : "fs #1" 0x01ce0000-0x01fe0000 : "fs #2" 0x01fe0000-0x02000000 : "fs #3" NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 4096 bind 8192) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (jffs2 filesystem). Freeing init memory: 68K serial c*** Running rc.splash nm -w 10015140 (0x9ffffc1f AND 0x9FFFFFFF) mm -w 10015140 9ffffc1f PCB version: ind5 FF board configuration selected: ind5 Driver SYSTCLK: SYSTCLK-1.12 (REFERENCED) Driver GPIO-1.59 (REFERENCED) GPIO: p_gpio_it_init at 572 Driver FRAMEBUF-1.12 (REFERENCED) Driver SPI-1.20 (REFERENCED) Debug level 3 u32_spi1_MinLenghtForDMAInTX set to 300 u32_spi1_MinLenghtForDMAInRX set to 300 Driver LCD-1.20 (REFERENCED) nm -w 10015140 (0x9f3ffc1f OR 0x00000040) mm -w 10015140 9f3ffc5f Driver TVLINK-1.45 (REFERENCED) Reset from Power-On Reset. chmod: /etc/rc.d/init.d/S91dpm: No such file or directory chmod: /etc/rc.d/init.d/S80apptrk: No such file or directory mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 1024 inodes, 4096 blocks 204 blocks (4.98%) reserved for the super user First data block=1 1 block group 8192 blocks per group, 8192 fragments per group 1024 inodes per group Writing inode tables: done Writing superblocks and filesystem accounting information: done mke2fs 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 Filesystem label= OS type: Linux Block size=1024 (log=0) Fragment size=1024 (log=0) 1024 inodes, 4096 blocks 204 blocks (4.98%) reserved for the super user First data block=1 1 block group 8192 blocks per group, 8192 fragments per group 1024 inodes per group Writing inode tables: done Writing superblocks and filesystem accounting information: done Sat Jan 1 00:00:00 CET 2005 *** Running rc.modules modprobe: Can't locate module mx2_mmc *** Running rc.serial *** Attempting to start S05syslog Starting /sbin/syslogd Done 077 Starting /sbin/klogd Done *** Attempting to start S06pcmcia 264/132 Mhz Blob detected !!! Starting PCMCIA services: Linux PCMCIA Card Services 3.2.4 kernel build: 2.4.20-celf3 #1 Thu Feb 22 18:23:13 UTC 2007 options: [apm] i.MX21 TO2 PCMCIA (CS release 3.2.4) dbmx_pcmcia_set_mem_map(): map (4) out of range cardmgr[128]: watching 1 sockets done. *** Attempting to start S20network Setting up link for loopback Done *** Attempting to start S23portmap Starting /sbin/portmap Done *** Attempting to start S80emma Loading eMMA post-processor module: Motorola PostProcessor Linux driver ver 0.64 - Copyright (C) 2003 Motorola Inc pp: hw ver = 2 GPIO: p_gpio_init_gpio_status at 1072 GPIO: CHARGE_OUT at init GPIO: No accessory plugged at init. GPIO: camera to front at init Loading dmab module: Loading eMMA pre-processor module: prp_dbg=0 Motorola PreProcessor Linux driver ver 0.0 - Copyright (C) 2003 Motorola Inc *** Attempting to start S81hantro Loading Hantro decoder module: hmp4d: base_port=0x10026800 irq=50 hmp4d: module inserted Loading Hantro encoder module: hmp4e: base_port=0x10026c00 irq=49 hmp4e: Compatble HW found with ID: 0x004c1882 hmp4e: module inserted. Major = 248 *** Running rc.local Motorola CSI Linux driver ver 0.1 - Copyright (C) 2004 Motorola Inc Driver SENSOR-1.29 (REFERENCED) Before calling register_pccard_driver After calling register_pccard_driver Entering cf_attach() Before registering the client BasePort1=0xc499a000, AssignedIRQ=28 After calling wlan_add_card function Leaving cf_attach() i2c-client version : 1.9 Initialize i2c-client-aic14 module Module i2c-client-aic14 initialized Insert module aic14 (AIC14-1.0) Module AIC14 assumes CODEC MCLK already configured for 20480000Hz Driver KPP-1.36 (REFERENCED) Driver DOZE-1.27 (REFERENCED) doze inserted with major number 154 +++++++++++++++++++++++++++++++++ MACAddress="00:16:41:72:70:8d" JH="JH110648010053" Test_status="C" Barcode="190831003412" +++++++++++++++++++++++++++++++++ imx21 login: Module doze unregistered (major number = 154) Driver KPP-1.36 (REFERENCED) Driver DOZE-1.27 (REFERENCED) conditions=0x7 gpio=255 gap=16 CMD_RESP: Host Sleep Cfg cmd resp 0x8043 received imx21 login: