CNC-Fraese/Werkzeuge
Aus LaborWiki
Spannzangen
Die Aufnahme ist ER-11
- 3mm
- 3,175 (1/8 Zoll)
- 6mm
- 8mm fehlt noch
Fräser
| Durchmesser | Scheidenlänge | Schneidenanzahl | Schaftdurchmesser | Sonstiges | |
|---|---|---|---|---|---|
| 0,9mm | 6mm | 2 | 1/8 Zoll | VHM | |
| 1,0mm | 6mm | 2 | 1/8 Zoll | VHM | |
| 1,0mm | 6mm | 2 | 1/8 Zoll | VHM, Diamantverzahnt, Fischschwanzanschliff | |
| 1,5mm | 9mm | 2 | 1/8 Zoll | VHM | |
| 1,6mm | 9mm | 2 | 1/8 Zoll | VHM | |
| 2,0mm | 9mm | 2 | 1/8 Zoll | VHM, 2 Stk. | |
| 2,0mm | 9mm | 2 | 1/8 Zoll | VHM, Diamantverzahnt,Fischschwanzanschliff | |
| 2,4mm | 9mm | 2 | 1/8 Zoll | VHM, Diamantverzahnt,Fischschwanzanschliff | |
| 3,0mm | 11mm | 1 | 3mm | VHM | |
| 3,0mm | 6mm | 1 | 3mm | VHM | |
| 4,0mm | 9mm | 2 | 6mm | HSS, recht stumpf | |
| 4,0mm | 7mm | 2 | 6mm | 2 Stk | HSS |
| 4,0mm | 12mm | 4 | 6mm | HSS | |
| 4,0mm | 14mm | 4 | 6mm | HSS | |
| 6,0mm | 13mm | 2 | 6mm | HSS, 3 Stk | |
| 6,0mm | 14mm | 2 | 6mm | HSS, 2 Stk mit Zahnausfall | |
| 6,0mm | 14mm | 4 | 6mm | HSS | |
| 8,0mm | 20mm | 4 | 8mm | VHM, 2 Stk | |
| 8,0mm | 20mm | 2 | 8mm | VHM | |
| 10,0mm | 47mm | 4 | 10mm | HSS PASST !NICHT IN UNSERE FRÄSE! |
Gravierstichel
4 Stk
| Spitzenwinkel | Schaftdurchmesser | |
|---|---|---|
| 30° | 3,175mm (1/8 Zoll) | |
| 45° | 3,175mm (1/8 Zoll) | |
| 60° | 3,175mm (1/8 Zoll) | |
| 135° | 3,175mm (1/8 Zoll) |