Wlan

Hardware:

• 2x RB411
• CPU ar7130 300Mhz, 200 bogomips, aes: mips16
• RAM 32MiB
• NAND 64MiB
• LAN 100-Tx RJ-45
• 2 x WLAN ar5416+ar5133 mini-pci abgn
• EIA232 (115200bit/s)
• 10-28V (Plus ist innen)
• poe non standart (4,5 +, 7,8 -)

Software:

• openwrt svn xxxx
• ath9k treiber
• elf bauen -> tftp -> bootp/dhcp boot -> wget2nand dateinamen die benötigt werden finden sich im script

Config Beispiel:

/etc/config/wireless

config wifi-device  wlan0
       option type     mac80211
       option country  DE
       option channel  1
       option ieee80211d 1
       option hwmode_11n g
       option ht_capab [HT40+][SHORT-GI-40][DSSS_CCK-40]

config wifi-iface
       option device   wlan0
       option network  lsec
       option mode     ap
       option ssid     l1
       option encryption psk2
       option key blafoo234711sicher

config wifi-iface
     option device wifi0
     option network lsec
     option ssid lsec
     option mode ap
     option encryption psk2
     option server 10.13.37.1
     option key foobar