HackingVGAforFun

VGA

Video Graphics Adapter

pinouts

VGA pinouts

edid

EDID I used EDID 1.3
Windows

• it accepts:
  • standart timings
  • established timings
• it looks like Windows XP doesn't like "prefered timings"

Linux

• The kernel module drm handels all the display stuff
• it accepts:
  • established timings
  • standart timings
  • prefered timings

build a fake monitor

• Terminate the color lines with 75ohms
• Attach a 24C02 serial eeprom to the specified pins (24c04 - 24c16 is possible to )

flash a new edid

• Load the kernelmodule i2c-dev
• Get i2c-tools
• build the i2c-tools
• Become root: Sudo -s
• Add the tools folder to the PATH: PATH=$PATH:< ... >/i2c-tools/tools
• Run i2cdump to find the correct BUSID (device at 0x50 and 0x51)
• Flash new EDID with write-edid.sh
• Note the input file is plain/text with hexvalues, spaces and newlines only

create custom edid

• use Phoenix EDID Designer to create custom EDIDs

Note

• the tool outputs .dat-files, that need to be editet by hand, it contains invalid symbols
• you can use the export function to generate .raw files and use hexdump to convert them to plain/text hex

custom edid

• it looks like ATI Radeon HD5xxx only accepts: >= 2 vsync and >= 1 hsync
  • with modified drm it is possible to use hsync == 0 too

hack the kernel module drm

• install linux-source
• install linux-kernel-headers
• modify the Makefile

all:
	$(MAKE) -C $(KDIR) M=$(PWD) modules
	cp drm.ko /lib/modules/`uname -r`/kernel/drivers/gpu/drm
	cp drm_kms_helper.ko /lib/modules/`uname -r`/kernel/drivers/gpu/drm
	chmod 755 /lib/modules/`uname -r`/kernel/drivers/gpu/drm
	update-initramfs -u

• patch drm_edid.c , it doesn't accept vsync_width OR hsync_width to be 0

• total lines has to be greater than active lines