Benutzer:Sauron: Unterschied zwischen den Versionen
Aus LaborWiki
Sauron (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
Sauron (Diskussion | Beiträge) Keine Bearbeitungszusammenfassung |
||
| Zeile 4: | Zeile 4: | ||
! Anzahl !! Beschreibung !! Reichelt Bestell Code !! Kosten | ! Anzahl !! Beschreibung !! Reichelt Bestell Code !! Kosten | ||
|- | |- | ||
| 2 || Widestand 68 Ohm ||1/4W 68 || | | 2 || Widestand 68 Ohm ||1/4W 68 ||0,20 | ||
|- | |- | ||
| 1 || Widerstand 270 Ohm ||1/4W 270 || | | 1 || Widerstand 270 Ohm ||1/4W 270 ||0,10 | ||
|- | |- | ||
| 2 || Widerstand 390 Ohm ||1/4W 390 || | | 2 || Widerstand 390 Ohm ||1/4W 390 ||0,20 | ||
|- | |- | ||
| 1 || Widerstand 1,5 K-Ohm ||1/4W 1,5K || | | 1 || Widerstand 1,5 K-Ohm ||1/4W 1,5K ||0,10 | ||
|- | |- | ||
| 1 || Widerstand 10 K-Ohm ||1/4W 10K || | | 1 || Widerstand 10 K-Ohm ||1/4W 10K ||0,10 | ||
|- | |- | ||
| 1 || Elektrolytkondensator || RAD 10/63 || | | 1 || Elektrolytkondensator || RAD 10/63 ||0,04 | ||
|- | |- | ||
| 2 || Keramik-Kondensator || KERKO 27P || | | 2 || Keramik-Kondensator || KERKO 27P ||0,12 | ||
|- | |- | ||
| 1 || Keramik-Kondensator || KERKO 100N || | | 1 || Keramik-Kondensator || KERKO 100N ||0,06 | ||
|- | |- | ||
| 1 || Led rot || LED 5MM RT | | 1 || Led rot || LED 5MM RT ||0,06 | ||
|- | |- | ||
| 1 || Led grün || LED 5MM GN | | 1 || Led grün || LED 5MM GN ||0,06 | ||
|- | |- | ||
| 2 || Zener-Diode 3,6V || ZF 3,6 | | 2 || Zener-Diode 3,6V || ZF 3,6 ||0,08 | ||
|- | |- | ||
| 1 || IC AVR ATmega8 DIL-28 || ATMEGA 8-16 DIP | | 1 || IC AVR ATmega8 DIL-28 || ATMEGA 8-16 DIP ||2,70 | ||
|- | |- | ||
| 1 || Standardquarz 12,00 MHz || 12,0000-HC49U-S | | 1 || Standardquarz 12,00 MHz || 12,0000-HC49U-S ||0,18 | ||
|- | |- | ||
| 1 || USB-B-Buchse, gewinkelt || USB BW | | 1 || USB-B-Buchse, gewinkelt || USB BW ||0,21 | ||
|- | |- | ||
| 1 || Wannenstecker, 10-polig, gerade || WSL 10G | | 1 || Wannenstecker, 10-polig, gerade || WSL 10G ||0,09 | ||
|- | |- | ||
| 1 || Stiftleiste, gerade, RM 2,54 || SL 1X36G 2,54 | | 1 || Stiftleiste, gerade, RM 2,54 || SL 1X36G 2,54 ||0,13 | ||
|- | |- | ||
| 1 || IC-Sockel, 28-polig, schmal || GS 28P-S | | 1 || IC-Sockel, 28-polig, schmal || GS 28P-S ||0,42 | ||
|- | |- | ||
| 3 || Jumper || JUMPER 2,54 SW | | 3 || Jumper || JUMPER 2,54 SW ||0,15 | ||
|- | |- | ||
| 1 || USB-Kabel A-Stecker auf B-Stecker || AK 672/2-1,0 | | 1 || USB-Kabel A-Stecker auf B-Stecker || AK 672/2-1,0 ||0,55 | ||
|- | |- | ||
| 2 || Pfostenbuchse, 10-polig || PFL 10 | | 2 || Pfostenbuchse, 10-polig || PFL 10 ||0,20 | ||
|- | |- | ||
| 1 || 10-adriges Flachbandkabel || AWG 28-10G 3M | | 1 || 10-adriges Flachbandkabel || AWG 28-10G 3M ||2,20 | ||
|- | |- | ||
| || || || 14,12 | | || || || 14,12 | ||
|} | |} | ||
Version vom 20. Februar 2011, 02:41 Uhr
| Anzahl | Beschreibung | Reichelt Bestell Code | Kosten |
|---|---|---|---|
| 2 | Widestand 68 Ohm | 1/4W 68 | 0,20 |
| 1 | Widerstand 270 Ohm | 1/4W 270 | 0,10 |
| 2 | Widerstand 390 Ohm | 1/4W 390 | 0,20 |
| 1 | Widerstand 1,5 K-Ohm | 1/4W 1,5K | 0,10 |
| 1 | Widerstand 10 K-Ohm | 1/4W 10K | 0,10 |
| 1 | Elektrolytkondensator | RAD 10/63 | 0,04 |
| 2 | Keramik-Kondensator | KERKO 27P | 0,12 |
| 1 | Keramik-Kondensator | KERKO 100N | 0,06 |
| 1 | Led rot | LED 5MM RT | 0,06 |
| 1 | Led grün | LED 5MM GN | 0,06 |
| 2 | Zener-Diode 3,6V | ZF 3,6 | 0,08 |
| 1 | IC AVR ATmega8 DIL-28 | ATMEGA 8-16 DIP | 2,70 |
| 1 | Standardquarz 12,00 MHz | 12,0000-HC49U-S | 0,18 |
| 1 | USB-B-Buchse, gewinkelt | USB BW | 0,21 |
| 1 | Wannenstecker, 10-polig, gerade | WSL 10G | 0,09 |
| 1 | Stiftleiste, gerade, RM 2,54 | SL 1X36G 2,54 | 0,13 |
| 1 | IC-Sockel, 28-polig, schmal | GS 28P-S | 0,42 |
| 3 | Jumper | JUMPER 2,54 SW | 0,15 |
| 1 | USB-Kabel A-Stecker auf B-Stecker | AK 672/2-1,0 | 0,55 |
| 2 | Pfostenbuchse, 10-polig | PFL 10 | 0,20 |
| 1 | 10-adriges Flachbandkabel | AWG 28-10G 3M | 2,20 |
| 14,12 |