Wlan

Hardware:

• 2x RB411 Board
• CPU ar7130 300Mhz, 200 bogomips
• RAM 32MiB
• NAND 64MiB
• LAN 100-Tx RJ-45
• 2 x WLAN AR5416 (Baseband/MACs) + AR5133 (Radio, 3 Tx, 3 Rx, dual-band 2.4/5GHz) mini-pci abgn Karte
• EIA232 (115200bit/s)
• 10-28V (Plus ist innen)
• POE non standart (4,5 +, 7,8 -)

Software:

• kernel 2.6.32.10
• openwrt svn r20960
• ath9k treiber
• elf bauen -> tftp -> bootp/dhcp boot (komprimiert) -> wget2nand http://x.x.x.x

Dateien die das Script benötigt:

openwrt-ar71xx-vmlinux.elf
openwrt-ar71xx-rootfs.tgz

tftp boot: openwrt-ar71xx-vmlinux-initramfs.elf

Config Beispiel:

/etc/config/wireless

config wifi-device  radio0
	option type     mac80211
	option channel  1
	option country DE
	option macaddr	xx:xx:xx:xx:xx:xx
	option hwmode	11ng
	option htmode	HT20
	list ht_capab	SHORT-GI-40
	list ht_capab	DSSS_CCK-40

config wifi-iface
	option device   radio0
	option network  lsec
	option ieee80211d 1
	option mode     ap
	option ssid     l1
	option encryption psk2
	option key 'blafoo234711sicher'

Client Config

wpa_supplicant

network={
	ssid="l1"
	proto=WPA2
	key_mgmt=WPA-PSK
	pairwise=CCMP
	group=CCMP
	psk="blafoo234711sicher"
}