Quelltext der Seite SDRT2

== Description ==
Hardware to transmit anything on any frequency. That means any information / modulation can be transmited on a channel between 100 and 2400 Mhz, which is the possible internal PLL frequency-range for ADRF6755. The I/Q signals are feed through a VGA-compatible 15pole-DSUB connector. <br>
This board is intended to be used with [[VGAtoBaseband]].<br>
While [[SDRT]] was configured using a teensy this board is connected to the VGA i2c and can be controlled from any Software that has access to this bus.
The board has a 50Ohms SMA connector transmitting about todo using VGA signals (0.8Vpp).

[[Datei:|thumb]]