Wlan: Unterschied zwischen den Versionen

Aus LaborWiki
Wechseln zu: Navigation, Suche
Keine Bearbeitungszusammenfassung
(Update auf den neusten Stand der Infrastruktur)
 
(Eine dazwischenliegende Version von einem anderen Benutzer wird nicht angezeigt)
Zeile 1: Zeile 1:
'''Hardware:'''
== Wie verbinde ich mich? ==


* 2x [http://www.mikrotik-shop.de/product_info.php?info=p304_MikroTik-RouterBOARD-411-L3--1-x-LAN--1-x-miniPCI-.html RB411] Board
* SSID: l1
** CPU ar7130 300Mhz, 200 bogomips
* Passwort: blafoo234211sicher
** RAM 32MiB
* Verschlüsselung: WPA2
** NAND 64MiB
** LAN 100-Tx RJ-45
** WLAN AR5416 (Baseband/MACs) + AR5133 (Radio, 3 Tx, 3 Rx, dual-band 2.4/5GHz) mini-pci abgn Karte
* 10-28V (Plus ist innen)
* POE non standart (4,5 +, 7,8 -)


'''Software:'''
== Hardware ==
* ath9k treiber


* 4x MSM460 APs (abgn dual-band)


tftp boot: openwrt-ar71xx-vmlinux-initramfs.elf
* Verwaltung durch einen HP MSM720 Controller
 
'''Config Beispiel:'''
 
/etc/config/wireless
config wifi-device  radio0
      option type    mac80211
      option channel  10
      option country  DE
      option macaddr  00:19:e3:fa:55:09
      option hwmode  11ng
      option htmode  HT20
 
config wifi-iface
      option device  radio0
      option ieee80211d 1
      option network  lsec
      option rsn_preauth 1
      option mode    ap
      option ssid    l1
      option encryption psk2
      option key 'blafoo234711sicher'
 


== Client Config ==
== Client Config ==
Zeile 48: Zeile 21:
  pairwise=CCMP
  pairwise=CCMP
  group=CCMP
  group=CCMP
  psk="blafoo234711sicher"
  psk="blafoo234211sicher"
  }
  }


[[Category:Admin]]
[[Category:Admin]]
[[Category:HowTo]]
[[Category:HowTo]]

Aktuelle Version vom 23. Februar 2018, 19:13 Uhr

Wie verbinde ich mich?[Bearbeiten | Quelltext bearbeiten]

  • SSID: l1
  • Passwort: blafoo234211sicher
  • Verschlüsselung: WPA2

Hardware[Bearbeiten | Quelltext bearbeiten]

  • 4x MSM460 APs (abgn dual-band)
  • Verwaltung durch einen HP MSM720 Controller

Client Config[Bearbeiten | Quelltext bearbeiten]

wpa_supplicant

network={
	ssid="l1"
	proto=WPA2
	key_mgmt=WPA-PSK
	pairwise=CCMP
	group=CCMP
	psk="blafoo234211sicher"
}