DasBand: Unterschied zwischen den Versionen

Aus LaborWiki
Wechseln zu: Navigation, Suche
Keine Bearbeitungszusammenfassung
Zeile 32: Zeile 32:


===Motor & Gear===
===Motor & Gear===
First tests were made with a low-budget gearmotor found on ebay.  Those are advertised with high torque rates. A closer look at the data sheet  shows that sometimes these numbers are the stall values. That means: No rotation at given load. The required torque for proper operation was not known before and there was no clue how to calculate it. The motor not only needs to press the material through the pipe and the die, sometimes the drill needs to cut pellets on their way from the hopper inside the heating pipe. That means that the required power depends on the used material.  The first test-material was a gift from the plastic labotory of the University Duisburg Essen. They gave us a whole 25kg bag for testing purpose.  Unfortunately the material was not suitable for processing it in a selfmade-extruder due to its low [http://en.wikipedia.org/wiki/Melt_flow_index MFI] (Melt-flow-index) value. 
<gallery>
<gallery>
Housing.JPG|CNC-Milled housing & bearings
Housing.JPG|CNC-Milled housing & bearings

Version vom 5. Januar 2013, 15:44 Uhr

     
Das Band - Polyethylene Extruder

Release status: stable [box doku]

IMG 2323.JPG
Description A Band making machine.
Author(s)  A.B. (Bilex)
Platform  Sophistication





Information

Das Band is a multicolored LD-PE ribbon. It is flexible but durable, has a nice smooth surface and can be cut into pieces easily. This assures high adaptability in many thousand applications. It was manufactured within two weeks in line with the Big Banana factory.

Dimensions: 1,5mm x 15mm x ~250.000mm 

Material: Riblene® MV10

Processing

The Extruder is the machine creating das Band. It works similar to those machines known from industrial production of plastic pipes, sheets and profiles. A turning screw (here: ordinary 20mm drill bit) takes plastic pellets from a feed hopper and squeeze them through a die. While in industrial machines the energy is provided by shear strain and high pressure, this machine works with an heating area where the pellets start to melt. After inserting energy into the material, it needs to be cooled down after leaving the die immediately to bring it into shape. (This loss of energy is a general problem during the extrusion process, even in industrial processing.) Several rotating rolls work as a shaping unit.

The Machine

Motor & Gear

First tests were made with a low-budget gearmotor found on ebay. Those are advertised with high torque rates. A closer look at the data sheet shows that sometimes these numbers are the stall values. That means: No rotation at given load. The required torque for proper operation was not known before and there was no clue how to calculate it. The motor not only needs to press the material through the pipe and the die, sometimes the drill needs to cut pellets on their way from the hopper inside the heating pipe. That means that the required power depends on the used material. The first test-material was a gift from the plastic labotory of the University Duisburg Essen. They gave us a whole 25kg bag for testing purpose. Unfortunately the material was not suitable for processing it in a selfmade-extruder due to its low MFI (Melt-flow-index) value.

Heating Unit

Die

Shaping Unit

Distribution

Final Band storage
Band in shopping trolley

Video

Video on Youtube